• Minimum sample hold-up: Unit housings are specifically designed to maximize sample recovery
• High purity: Non-pigmented housing and integral filter sealing assure that filtrates will not be adulterated due to pigment, dye, or adhesives leaching into the filtrate
• Convenient: Each unit is clearly marked with an identifying code to denote pore size, membrane material, and housing polymer
• Sterile: Units can be purchased pre-sterilized and individually packaged or nonsterile in bulk pack
• All polypropylene can be autoclaved
• High purity: Non-pigmented housing and integral filter sealing assure that filtrates will not be adulterated due to pigment, dye, or adhesives leaching into the filtrate
• Convenient: Each unit is clearly marked with an identifying code to denote pore size, membrane material, and housing polymer
• Sterile: Units can be purchased pre-sterilized and individually packaged or nonsterile in bulk pack
• All polypropylene can be autoclaved
DISMIC |
LABODISC |
||||||
3 mm |
13 mm |
25 mm |
|
30 mm |
50 mm |
||
Housing
material |
- |
PP |
PP |
PP |
Acrylic |
PP |
PP |
Housing
Diameter |
mm |
3 |
13 |
25 |
25 |
30 |
50 |
Filtration
Area |
cm2 |
0.06 |
0.9 |
4.0 |
4.0 |
4.8 |
4.6 |
Hold-up
Volume |
mL |
<0.01 |
<0.03 |
<0.1 |
<0.1 |
<0.1 |
<3.0 |
Suggested
capacity per filter unit |
mL |
<2 mL |
<10 mL |
<100 mL |
<100 mL |
<120 mL |
>100 mL |
Pressure
limit |
MPa |
0.51 |
0.51* |
0.51* |
0.51 |
0.88 |
0.34 |
|
psi |
74 |
74* |
74* |
74 |
128 |
49 |
Maximum
Operating Temperature |
°C |
60 |
60 |
60 |
45 |
180 |
60 |
Connections |
- |
inlet:
female luer-lock |
7–13.5 mm
hose barb |